Alum Sulfat Bubuk (Aluminium Sulfate Powder) Material Datasheet
1. Identification of the substance/mixture
| 1.1. | Product identifier Product name : Aluminium sulfate (solid) | |
| 1.2. | Relevant identified uses of the substance or mixture and advised against Identified uses : Water purification , Sewage treatment , Deodorizer and decolorizing in petroleum refinery processes, Water proofing agent for concrete, Sizing paper and pH control, Clarifying agent for fats and oil. |
2. Hazard Identification
| 2.1. | Classification of the substance or mixture This substance is not classified as dangerous according to European Union legislation. | |
| 2.2. | GHS label elements Labeling (Regulation (EC) No. 1272/2008) Precautionary statements P 262 : Do not get in eyes, on skin, or on clothing Labeling (67/548/EEC or 1999/45/EC) S – phrase(s) 24/25 Avoid contact with skin and eyes |
3. Composition / information on ingredients
| Formula | : | Al2(SO4)3.14H2O |
| CAS No. | : | 7784-31-8 |
| EC No. | : | 233-135-0 |
| Molar mass | : | 594 g/mol |
4. First aid measures
After inhalation : fresh air. Indication of any immediate medical attention and special treatment needed No information available. |
5. Fire-fighting measures
| Suitable Extinguishing media Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Special hazards during fire fighting No combustible. Ambient fire may liberate hazardous vapours. Advice for fire fighters Special protective equipment for fire-fighters Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing. |
6. Accidental release measures
| Personal precautions Avoid inhalation of dusts. Evacuate the danger area, observe emergency procedures, consult an expert. Environmental precautions Do not empty into drains Methods for cleaning up Cover drains. Collect, bind, and pump off spills. Take up dry. Dispose of properly. Clean up affected area. Avoid generation of dusts. |
7. Handling and storage
Precautions for safe handling Conditions for safe storage, including any incompatibilities
|
8. Exposure controls/personal protection
Respiratory protection
Required when dusts are generated.
Eye protection
Safety glasses
Hygiene measures
Change contamined clothing. Wash hands after working with substance.
9. Physical and chemical properties
9.1. Information on basic physical and chemical properties
| Form Colour Odour pH Viscocity, dynamic Melting point Boiling point/boiling range Ignition temperature Flash point Oxidizing properties Flammability Lower explosion limit Upper explosion limit Vapour pressure Relative vapour density Density Bulk Density | solid white to brownish solid odourless >3 (1% solution at 27°C) no data available 770 °C not applicable not applicable not applicable no data available no data available not applicable not applicable no data available not applicable no data avalaible 920 kg/m3 |
9.2 Other data
| Solubility/qualitative Water solubility Partition coefficient: n- Octanol/water Evaporation rate | no data available 87 g/100 cc at 27°C not applicable no data available |
10. Stability and reactivity
Chemical stability
Releases water of crystallization when heated
Possibility of hazardous reactions
None
Conditions to avoid
No information available
Incompatible materials
No information available
Hazardous decomposition products
In event of fire : see chapter 5
Reactivity See section 10.2
11. Toxicological information
Acute oral toxicity Further data : |
12. Ecological information
Ecotoxicity Persistence and degradability |
13. Disposal considerations
Waste treatment methods
Cleaned up material may be a hazardous waste. DO NOT flush to surface water or sanitary sewer system. Waste must be disposed of in accordance with local environmental control regulations.
14. Transport information
Not classified as dangerous in the meaning of transport regulations
15. Regulatory Information
Safety, health and environmental regulations/legislation specific for the substance or mixture EU regulations
Major Accident Hazard 96/82/EC
Legislation Directive 96/82/EC
National Legislation Storage class 10 – 13 Other liquids and solids
Chemical Safety Assessment
For this product a chemical safety assessment was not carried out
16. Other Information
This information is furnished without warranty, expressed or implied, as to accuracy or completeness. The information is obtained from various sources including the manufacturer and other third party sources. The information may not be valid under all conditions nor if this material is used in combination with other materials or in any process. Final determination of suitability of any material is the sole responsibility of the user.
Alum Sulfat Bubuk (Aluminium Sulfate Powder) Product Information
Product Identification
| Product Name | Aluminum Sulfate | |
| Chemical Formula | Al2(SO4)3.14H2O | |
| Synonym | Alum, Aluminum alum | |
| Registrations | CAS-Nr..7784-31-8(Hydrate) | |
| Appearance | White.to.brownish.solid |
Packing
| Size Solid | Granular.standard,.powder granular special grade (1-3) mm ; (1-12) mm |
| 25 kg | Multiply kraft paper bag PE inner linner |
| 25 kg or 50 kg | PP woven bag with PE inner liner |
| 500 kg to 1000 kg net in | PP jumbo / big bag with PE laminated |
Applications
Water Purification Sewage Treatment Water Proofing Agent for concrete Sizing Paper and pH Control Clarifying Agent for Fats and Oil Deodorizer and Decolorizer in Petroleum Refinery Processes |
Product Specification | Granular | Powder | Liquid | |||
| Standard | Special Grade | |||||
| < 12 mm | (1-3) mm | (1-12) mm | ||||
| Particle size | Unit % | < 12 mm 98% min | (1-3) mm 85% min | (1-12) mm 90% min | < 2 mm 98% min | |
| Bulk Density | g/cm3 | 0.83-0.87 | 0.84-0.89 | 0.83-0.87 | 0.90-0.93 | |
| Specific Gravity (20oC) | g/cm3 | 1.3 min | ||||
| Aluminum Oxide (Al2O3) | % | 17 min | 8 min | |||
| Water insoluble Matter | % | 0.5 max | 0.25 max | |||
| Iron (Fe) | % | 0.01 max | 0.01 max | |||
| Heavy metal (as Pb) | % | 0.0010 max | 0.0010 max | |||
| Arsenic (As) | % | 0.0002 max | 0.0002 max | |||
| pH 1 % solution (solid) | 3.0 min | |||||
| pH 2 % solution (liquid) | 3.0 min | |||||
Testing method :SNI 2809:2014